Chart Menu; Chart Layers - Garmin ECHOMAP UHD2 Owner's Manual

Chart Menu

NOTE: Not all settings apply to all chart views. Some options require premium maps or connected accessories.
NOTE: The menus may contain some settings that are not supported by your installed charts or your present
location. If you make changes to those settings, the changes will not impact the chart view.
These settings apply to the chart views, except Fish Eye 3D
From a chart, select Menu.
Layers: Adjusts the appearance of the different items on the charts
Waypoints & Tracks: Adjusts how waypoints and tracks are shown
Quickdraw Contours: Turns on bottom contour drawing, and allows you to create fishing map labels
Quickdraw Contours Mapping,
Chart Setup: Adjusts the orientation and level of detail shown on the chart and adjusts the data shown on the
screen.
Edit Overlays: Adjusts the data shown on the screen

Chart Layers

You can turn on and off chart layers and customize features of the charts. Each setting is specific to the chart
or chart view being used.
NOTE: Not all settings apply to all charts and chartplotter models. Some options require premium maps or
connected accessories.
NOTE: The menus may contain some settings that are not supported by your installed charts or your present
location. If you make changes to those settings, the changes will not impact the chart view.
From a chart, select Menu > Layers.
Chart: Shows and hides chart-related items
My Vessel: Shows and hides items relating to the boat
User Data: Shows and hides user data, such as waypoints, boundaries, and tracks, and opens user data lists
(User Data Layer Settings,
Other Vessels: Adjusts how other vessels are shown
Water: Shows and hides depth items
Quickdraw Contours: Shows and hides Garmin Quickdraw Contours data
page 31).
Chart Layer Settings
From a chart, select Menu > Layers > Chart.
Satellite Photos: Shows high-resolution satellite images on the land or on both land and sea portions of the
Navigation chart, when certain premium maps are used
page 18).
NOTE: This setting must be enabled to view Standard Mapping charts.
Tides & Currents: Shows current station indicators and tide station indicators on the chart and enables the tides
and current slider, which sets the time for which tides and currents are reported on the map.
Land POIs: Shows points of interest on land.
Navaid: Shows navigational aids, such as ATONs and flashing lights, on the chart. Allows you to select NOAA or
IALA navaid type.
Service Points: Shows locations for marine services.
Depth: Adjusts the items on the depth layer
Restricted Areas: Shows information about restricted areas on the chart.
Photo Points: Shows camera icons for aerial photos
Charts and 3D Chart Views
page 28).
(Chart Layer Settings,
page 25).
(Water Layer Settings,
(Water Layer Settings,
(Fish Eye 3D Settings,
(Chart Layers,
(User Data Layer Settings,
(Customizing the Data Overlays,
page 23).
(My Vessel Layer Settings,
(Other Vessels Layer Settings,
page 25).
(Garmin Quickdraw Contours Settings,
(Showing Satellite Imagery on the Navigation Chart,
page 25).
(Viewing Aerial Photos of Landmarks,
page 26).
page 23).
page 25).
(Garmin
page 8).
page 24).
page 25).
page 19).
23