Connector View; Assigning A Shortcut Key - Garmin ECHOMAP ULTRA Series Owner's Manual

Connector View

Item Label Description
POWER Power and NMEA
12 PIN XDCR 12-pin transducer
LVS XDCR Panoptix
NMEA 2000 NMEA 2000
Panoptix LiveScope sonar or Garmin
NETWORK
data
Ground screw
To prevent corrosion of the metal contacts, cover unused connectors with weather caps.
For best performance and to prevent corrosion, insert the cable connector fully into the port and turn the locking
ring clockwise to tighten it. If the split-collar locking ring is not installed, you must install it.
To comply with regulations and to reduce noise, snap the ferrite beads on the network and transducer cables,
near the connectors.

Assigning a Shortcut Key

You can quickly open commonly used screens by assigning a shortcut key. You can create a shortcut to screens
such as sonar screens and charts.
1 Open a page.
2 Hold a shortcut key, and select OK.
2
® 0183 devices
LiveScope LVS12 12-pin transducer
™ ™
® network
NOTICE
® Marine Network for sharing sonar, charts, and user
Introduction