Illuminated Embers; Install Base Refractory And Burner Media/Embers - Heat & Glo 6KX-AU Installation Manual

E. Illuminated Embers
Illuminated Embers Placement
1. Pour illuminated embers between the left and right
base refractories as shown in Figure 11.3.

ILLUMINATED EMBERS

ILLUMINATED EMBERS
Figure 11.3 Illuminated Embers Installed
Figure 11.4 Burner Media / Ember Placement
= NO EMBERS
Heat & Glo • 6KX-AU Installation Manual • 2589-980 Rev. B • 5/23
F. Install Base Refractory and Burner Me-
dia/Embers
Install Base Refractory
Install base refractory into firebox. Base refractory will fit
around burner. The front edge of the refractory is posi-
tioned flush with the firebox return bend.
Install Burner Media/Embers
WARNING! Risk of Explosion! Follow ember placement
instructions in manual. DO NOT completely block burner
ports with ember material. Replace ember material annu-
ally. Improperly placed embers interfere with proper burner
operation.
Ember material is shipped with this gas appliance. To place
the ember material:
• Embers CANNOT completely block burner ports. Care
should be taken not to block the lighting trail of ports.
• Embers may only be placed in areas as shown in Figure
11.4.
• Save the remaining ember materials for use during
appliance servicing. The embers provided should be
enough for 3 to 5 applications.
Apply embers here for
smooth lighting characteristics.
73