Install The Burner Overlay - Heat & Glo 6KX-AU Installation Manual

D. Install the Burner Overlay
1. Locate the burner overlay shipped inside the firebox.
2. Remove the burner overlay from the packaging.
Check to ensure all ports are free from any obstruc-
tions. See Figure 11.1.
3. To install the burner overlay, mate the locating holes
with the guide sleeves. Install fiber burner top so that
it makes full contact with the underlying burner assem-
bly. See Figure 11.2.
4. Ensure that the ports in the steel burner are visible
through the holes in the fiber burner top.
BURNER OVERLAY
DETAIL
BLOCKED PORT
PARTIALLY
BLOCKED PORT
Figure 11.1 Check Burner Ports
72
OPEN PORT
Heat & Glo • 6KX-AU Installation Manual • 2589-980 Rev. B • 5/23
BURNER OVERLAY
BURNER ASSEMBLY
GUIDE SLEEVES
FOR BURNER OVERLAY
BURNER OVERLAY BURNER OVERLAY
Figure 11.2 Burner Overlay Installed
LOCATING HOLES