Table of Contents
Advertisement
D. Hearth Extension
A hearth extension is not required with these models.
Refer to Section 3 for clearances and information
regarding vinyl flooring restrictions.
E. Decorative Barrier Front Dimensions for
Finishing
Only decorative barrier fronts certified for use with this ap-
pliance model may be used. Contact your dealer for a list
of decorative barrier fronts that may be used.
Decorative Barrier Front Fit Types
• Inside Fit as shown in Figure 10.10. Decorative barrier
front fits inside appliance opening.
•
Overlap fit as shown in Figure 10.11. Decorative bar-
rier front is installed on top of finishing material.
THE GUARD IS FITTED TO THIS APPLIANCE
TO REDUCE THE RISK OF FIRE OR INJURY
FROM BURNS AND NO PART OF IT SHOULD
PERMANENTLY BE REMOVED. FOR PROTEC-
TION OF YOUNG CHILDREN OR THE INFIRM,
A SECONDARY GUARD IS REQUIRED.
64
Heat & Glo • 6KX-AU Installation Manual • 2589-980 Rev. B • 5/23
NON-COMBUSTIBLE
FINISHING MATERIAL
6 IN. (152 mm) MAX.
THICKNESS
(Includes 1/8 in. (3 mm) opening each side of door)
Non-Combustible Finishing material between
1 in. (25 mm)and 6 in. (152 mm) thick.
Figure 10.10 Inside Fit Decorative Barrier Front
FRONT FACE OF FIREPLACE
DECORATIVE BARRIER FRONT
Finishing materials 1 in. maximum thick.
Stop finishing material flush with opening.
Figure 10.11 Overlap Fit Decorative Barrier Front
NON-COMBUSTIBLE
FINISHING MATERIAL
6 IN. (152 mm) MAX.
THICKNESS
DECORATIVE BARRIER FRONT
X
1 in. (25 mm) MAX
NON-COMBUSTIBLE
FINISHING MATERIAL
(TOP EDGE)
Y
Advertisement
Table of Contents
