IBM TS4300 User Manual page 175

IBM Confidential
Flag Flag Name
Numb
er
26 Cooling Fan
Failure
27 Power Supply
30 Hardware A
31 Hardware B
32 Interface
33 Eject media
34 Download fail
35 Drive humidity
36 Drive
temperature
37 Drive voltage
Hex Description
Cod
e
1Ah A tape drive cooling fan failed.
1Bh A redundant power supply
failed inside the tape drive
enclosure. Check the enclosure
users manual for instructions
on replacing the failed power
supply.
1Eh Set when a hardware failure
occurs that requires that you
reset the tape drive to recover.
1Fh Set when the tape drive fails its
internal Power-On Self-Tests.
20h Set when the tape drive detects
a problem with the SCSI, Fibre
Channel, or RS-422 interface.
21h Set when a failure occurs that
requires you to unload the
cartridge from the drive.
22h Set when the tape drive detects
a problem with the SCSI, Fibre
Channel, or RS-422 interface.
23h Sets when the drive humidity
sensor indicates that the
drive's humidity exceeds the
recommended humidity of the
drive.
24h Set when the drive's temperature
sensor indicates that the drive's
temperature is exceeding the
recommended temperature of
the library.
25h Set when the drive detects
that the externally supplied
voltages are either approaching
the specified voltage limits or are
outside the voltage limits.
Action Required
Fan failure inside tape drive
mechanism or tape drive
enclosure.
A redundant power supply
failed inside the tape drive
enclosure. Check the enclosure
users manual for instructions
on replacing the failed power
supply.
Reset the tape drive. If the
error persists even after resetting
the drive, note the error code
on the single-character display
and look for the code in "Drive
Error Codes: Single-character
display (SCD)" on page 145 for
appropriate instructions.
Note the error code on the
single-character display and see
in "Drive Error Codes: Single-
character display (SCD)" on page
145 for appropriate instructions.
Set when the tape drive detects
a problem with the SCSI, Fibre
Channel, or RS-422 interface.
Unload the tape cartridge, then
reinsert it and restart the
operation.
Ensure that it is the correct FMR
image. Download the FMR image
again.
See Error Code 1 in "Drive Error
Codes: Single-character display
(SCD)" on page 145.
See Error Code 1 in "Drive Error
Codes: Single-character display
(SCD)" on page 145.
See Error Code 2 in "Drive Error
Codes: Single-character display
(SCD)" on page 145.
Chapter 5. Troubleshooting 143
Event
Warning
Event
Warning
Event
Warning
Event
Warning
Event
Warning
Event
Warning
Event
Warning
Event
Warning
Event
Warning
Event
Warning
Event