Locating Management Functions; Front Panel Leds - IBM TS4300 User Manual

IBM Confidential
3. If a PIN is configured, enter the PIN, then select Login and press Enter.
Status icons
Figure 59. Front panel LEDs
Table 37. Front panel LEDs
LEDs
Ready
Unit Identification (UID)
Clean
Attention
Error

Locating Management functions

This table provides the menu navigation to assist with library setup and configuration.
Table 38. Locating Management functions
Task
Advanced settings
Auto Calibration
Auto Clean
Cartridge, eject from a drive
Color
Green
Blue when
activated
Amber
Amber
Amber
Operator Panel
Not available with this interface
Not available with this interface
Not available with this interface
Operation > Move Cartridge from
Drive to Home Slot
Descriptions
Steady when power is on, flashing with tape
Ready drive or library robotic activity.
The UID LEDs are controlled by the user
through the Library>Actions>Turn Identifier
Light On or Off GUI function. The UIDs on
the Operator Panel and base module back
panel are activated and deactivated together. In
addition, UIDs on drives and expansion module
back panels can be activated separately. The
UIDs are helpful for locating components of the
library in a data center.
On, when a tape drive-cleaning operation is
recommended.
Flashing if the library detected a condition
for which user attention is necessary, but the
library can still complete most operations.
On, if an unrecoverable tape drive or library
error occurs. A corresponding error message is
displayed on the LCD screen. User intervention
is required as the library is not capable of
completing some operations.
Menu Navigation
Management GUI
Settings > Library > Advanced
Settings > Library > Auto Calibration
Library > Logical Libraries > Actions
> Manage Logical Library (Expert
Mode) See "Methods of cleaning
drives" on page 86.
Drives > Actions > Eject Cartridge
from Drive
Chapter 4. Managing 79