IBM TS4300 User Manual page 171

IBM Confidential
Parameter
Code Flag name
04d Library
Hardware D
05d Library
Diagnostics
Required
13d Library Pick
Retry
14d Library Place
Retry
15d Library Load
Retry
16d Library Door
17d Library I/O
Station
19d Library
Security
20d Library
Security
Mode
21d Library
Offline
22d Library Drive
Offline
Type Description
C The library has a hardware fault that is not mechanically related or
requires a power cycle to recover.
• Turn the media changer OFF, then ON.
• Restart the operation.
• If the problem persists, contact Technical Support.
W The library mechanism might have a hardware fault.
Run extended diagnostics to verify and diagnose the problem. Check
the library user's manual for device-specific instructions on running
extended diagnostic tests.
W There is a potential problem with the drive ejecting cartridges or with the
library picking cartridges from a slot.
• No action needs to be taken at this time.
• If the problem persists, contact Technical Support.
W There is a potential problem with the library mechanism placing a
cartridge into a slot.
• No action needs to be taken at this time.
• If the problem persists, contact Technical Support.
W There is a potential problem with the drive or the library mechanism
loading cartridges, or an incompatible cartridge.
This flag is cleared when the next move command is received.
C The operation failed because the library door is open.
• Clear any obstructions from the library door.
• Close the library door.
• If the problem persists, call the library supplier help line.
C There is a mechanical problem with the library media I/O Station.
W Library security is compromised. The door was opened then closed
during operation.
I The library security mode was changed. The library was either put
into secure mode, or the library exited the secure mode. This is for
information purposes only. No action is required.
I The library was manually turned offline and is unavailable for use.
I A drive inside the library was taken offline. This is for information
purposes only. No action is required.
Chapter 5. Troubleshooting 139