IBM TS4300 User Manual page 159

IBM Confidential
Table 46. Warning events (continued)
Event Code Message Text and Description
4060 Connection to the KMIP server failed.
4061 Key is not found on KMIP server.
4062 Key creation on KMIP server failed.
4063 KMIP configuration invalid.
4064 KMIP feature not licensed.
4065 A tape alert flag was reported by a drive.
4067 Cleaning cartridge will soon expire and
must be replaced.
4072 No cleaning cartridge in logical library
available for auto cleaning.
4073 Medium source element empty.
4074 Medium source element empty.
Details and Solution
• Verify the username and password and all
needed SSL certificates that are needed for
connecting to the KMIP server.
• Verify that the KMIP server is reachable
within the network.
• Verify the IP addresses and host names of
the KMIP servers that are entered into the
wizard.
If this error happens during the connectivity
check, the additional information parameter
includes further error information that is
received from the Cryptsoft KMIP library. It also
includes the information if the server wasn't
able to ping.
Verify that the requested key is available on the
KMIP server. Check the KMIP server logs for
details.
Check the KMIP server logs for details about
why key creation failed.
Use the KMIP configuration wizard to verify the
KMIP configuration.
Disable KMIP or install appropriate license for
KMIP feature.
Look for logged TapeAlert flags and see its
description in the "TapeAlert flags" on page
138 section.
Replace the cartridge.
• Auto cleaning is enabled, but the logical
library contains no labeled cleaning cartridge.
The library was unable to complete the auto
clean function for one or more drives in this
logical library.
• Install a valid and labeled cleaning cartridge
into the logical library and then complete
a load and unload on the drive that needs
cleaning to start the auto cleaning.
Check the source slot visually and rescan the
inventory. Additionally, check for valid and
readable bar code label.
Check the source slot visually and rescan the
inventory. Additionally, check for valid and
readable bar code label.
Chapter 5. Troubleshooting 127