Labels & Cosmetics - Grizzly T33901 Owner's Manual

201
207
208
WARNING!
Specifications
Motor: 3/4 HP, 120V, 1-Phase, 60 Hz To reduce risk of serious personal injury when using this machine:
Full-Load Current Rating: 7.5A 1. Read and understand owner's manual before operating.
Max. Distance Spindle to Table: 15-7/8" 2. Always wear approved safety glasses and a face shield.
Max. Distance Spindle to Base: 23-3/8" 3. Only plug power cord into a grounded outlet.
Spindle Speeds: 12 (340–2860 RPM) 4. Disconnect power before setting up or servicing.
Spindle Travel: 3-1/4" 5. Avoid spindle entanglement. Tie back long hair, roll up long
Spindle Taper: MT#2 sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
Weight: 108 lbs. 6. Keep all guards and covers in place during operation.
7. Clamp workpiece to table to prevent rotation.
8. Avoid putting hands where they could slip into rotating bits.
9. Always remove chuck keys and other tools before starting.
10. Use correct speeds for drill bits and workpiece material.
11. DO NOT expose to rain or use in wet locations.
12. Prevent unauthorized use by children or untrained users.
Specifications WARNING!
Motor: 3/4 HP, 120V, 1-Phase, 60 Hz To reduce risk of serious personal injury when using this machine:
Full-Load Current Rating: 7.5A 1. Read and understand owner's manual before operating.
Max. Distance Spindle to Table: 26-3/8" 2. Always wear approved safety glasses and a face shield.
Max. Distance Spindle to Base: 45-3/4" 3. Only plug power cord into a grounded outlet.
Spindle Speeds: 12 (340–2860 RPM) 4. Disconnect power before setting up or servicing.
Spindle Travel: 3-1/4" 5. Avoid spindle entanglement. Tie back long hair, roll up long
Spindle Taper: MT#2 sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
Weight: 126 lbs. 6. Keep all guards and covers in place during operation.
7. Clamp workpiece to table to prevent rotation.
8. Avoid putting hands where they could slip into rotating bits.
9. Always remove chuck keys and other tools before starting.
10. Use correct speeds for drill bits and workpiece material.
11. DO NOT expose to rain or use in wet locations.
12. Prevent unauthorized use by children or untrained users.
REF PART # DESCRIPTION
201 PT33901201 GRIZZLY LOGO LABEL
202 PT33901202 ENTANGLEMENT HAZARD LABEL
203 PT33901203 COMBO WARNING LABEL
204 PT33901204 TOUCH-UP PAINT, GRIZZLY BLACK
205 PT33901205 TOUCH-UP PAINT, GRIZZLY GREEN
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
-52-
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
Labels & Cosmetics
202
WARNING!
ENTANGLEMENT
HAZARD!
Always keep this
cover closed during
operation.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
WARNING!
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
206
CAUTION!
LASER RADIATION!
Do not stare into beam.
Class: II
Wavelength: 650nm
Max. Output: 1m W
207
206
CAUTION!
LASER RADIATION!
Do not stare into beam.
Class: II
Wavelength: 650nm
Max. Output: 1m W
205
204
REF PART # DESCRIPTION
206 PT33901206 LASER LABEL
207 PT33901207 ELECTRICITY LABEL
208 PT33901208 MACHINE ID LABEL (T33901)
208 PT33902208 MACHINE ID LABEL (T33902)
Model T33901/T33902 (Mfd. Since 07/23)
203
WARNING! WARNING!
EYE/FACE INJURY
HAZARD!
Always wear
ANSI-approved safety
glasses and face
shield when using this
machine.