Labels & Cosmetics - Grizzly T31739 Owner's Manual

REF PART # DESCRIPTION
110 PT31739110 SPEED SENSOR CORD 24G 3W 10"
113 PT31739113 HEX WRENCH 3MM
114 PT31739114 HEX WRENCH 4MM
115 PT31739115 HEX WRENCH 5MM
NOTICE
Only change speed while
spindle is turning.
204
REF PART # DESCRIPTION
201 PT31739201 SHOCK/PINCH HAZARD LABEL
202 PT31739202 MANUAL/ENTANGLEMENT/EYE-FACE LABEL
203 PT31739203 SPEED ADJUSTMENT LABEL
204 PT31739204 SPEED NOTICE LABEL
205 PT31739205 MODEL NUMBER LABEL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
BUY PARTS ONLINE AT GRIZZLY.COM!
-40-
Scan QR code to visit our Parts Store.
Main Parts List (Cont.)
Labels & Cosmetics
WARNING!
201
203
–
+
T31739
Specifications
Motor: 1/3 HP, 120V, 4.3A, 1-Ph, 60 Hz
Max Distance Spindle to Column: 6"
Max Distance Spindle to Table: 13-1/4"
Max Distance Spindle to Base: 20-1/4"
Spindle Speed Range: 300-3000 RPM
Drilling Capacity Mild Steel: 5/8"
Spindle Travel: 3-1/2"
Spindle Taper: MT#2
Weight: 93 lbs.
208
REF PART #
116 PT31739116
117 PT31739117
118 PT31739118
119 PT31739119
WARNING!
PINCH
HAZARD!
Always keep this
cover closed
during operation.
WARNING! WARNING!
To reduce risk of death ENTANGLEMENT
or serious injury, read HAZARD!
manual BEFORE using Tie back long hair, roll up
machine. long sleeves, and remove
loose clothing, jewelry, or
To get a new manual, call
gloves to prevent getting
(800) 523-4777 or go to
caught in moving parts.
www.grizzly.com.
205
206
WARNING!
To reduce the risk of serious injury when using this machine:
1. Read and understand owner's manual before operating.
2. Always wear approved safety glasses.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up or servicing.
5. Tie back long hair, roll up long sleeves, and DO NOT wear loose
clothing, gloves, or jewelry.
6. Keep all guards and covers in place during operation.
7. Clamp workpiece to table to prevent rotation.
8. Avoid putting hands where they could slip into rotating bits.
9. Always remove chuck keys and other tools before starting.
10. Use correct speeds for drilling accessories and workpiece.
11. Do not expose to rain or use in wet locations.
12. Prevent unauthorized use by children or untrained users.
207
210
REF PART #
206 PT31739206
207 PT31739207
208 PT31739208
209 PT31739209
210 PT31739210
Model T31739 (Mfd. Since 11/19)
DESCRIPTION
DRIFT KEY
FLANGE SCREW M6-1 X 12
EXT RETAINING RING 12MM
SET SCREW M8-1.25 X 12
WARNING!
EYE/FACE INJURY
HAZARD!
202
Always wear
ANSI-approved safety
glasses and face
shield when using
this machine.
209
DESCRIPTION
MACHINE ID LABEL
LASER LABEL
ELECTRICITY LABEL
TOUCH-UP PAINT GRIZZLY GREEN
TOUCH-UP PAINT GRIZZLY BLACK