Table of Contents
Advertisement
Quill & Column Surfaces
Oil Type .... Grizzly SB1365 or ISO 68 Equivalent
Oil Amount ............................................Thin Coat
Lubrication Frequency ...........8 Hrs. of Operation
Items Needed
Mineral Spirits .................................... As Needed
Shop Rags ......................................... As Needed
Move the spindle all the way down to access
the smooth surfaces of the quill. Adjust the table
height as necessary to access the entire length of
the column (see Figures 46–47). Clean both with
mineral spirits and shop rags.
Note: Avoid removing the grease from the column
and quill racks during cleaning.
Quill
Surface
Figure 46. Example of spindle moved down to
expose quill surface.
Column
Surfaces
Figure 47. Column surface locations.
After cleaning, allow mineral spirits to dry, then
apply a thin coat of oil to the surfaces.
-34-
Column Rack, Quill Rack & Pinion
Grease Type .... Grizzly T26419 or NLGI#2 Equiv.
Grease Amount ....................................Thin Coat
Lubrication Frequency ......... 90 hrs. of Operation
Qty
Items Needed
Mineral Spirits .................................... As Needed
Shop Rags ......................................... As Needed
Stiff Brushes ...................................................... 2
Move spindle all the way down to gain access to
quill rack (see Figure 48), then clean teeth with
mineral spirits, shop rags, and a brush.
Clean the column rack teeth (see Figure 48) in
a similar manner with mineral spirits, shop rags,
and a brush.
Column Rack
Figure 48. Example of quill and column racks
Allow mineral spirits to dry, then use a brush to
apply a thin coat of grease to the rack teeth, then
fully raise/lower the quill and table to distribute the
grease.
Model T33901/T33902 (Mfd. Since 07/23)
Quill Rack
exposed.
Qty
Advertisement
Table of Contents
