Grizzly T33901 Owner's Manual page 7

Downfeed Handle (1 of 3): Moves spindle
J.
down when pulled down. Spindle automati-
cally returns to top position when released.
K. Chuck: Accepts drill bits with shanks from
⁄ "– ⁄ ".
1 5
8 8
L
Figure 4. Left headstock components.
Belt Tension Lock Knob (1 of 2): Locks
L.
motor position.
M. Depth Stop: Stops spindle travel at prede-
termined drilling depth. Top of depth stop nut
indicates depth on scale.
N. Spindle Return
returns quill into headstock.
LED & Laser Guide
O
Figure 5. LED and laser guide.
Model T33901/T33902 (Mfd. Since 07/23)
M
N
Spring: Automatically
P
O. LED: Illuminates work area.
Laser Guide: Projects crosshairs on table to
P.
align workpiece to drill bit.
Table
Q
Figure 6. Right table components.
Q. Table Pivot Lock Handle: Loosens to allow
rotation of table; tightens to lock table rotation.
R. Table Height Crank: Adjusts table up and
down.
S
T
Figure 7. Left table components.
S. Tilt Scale: Displays current table tilt angle.
Table Height Lock Handle: Loosens to
T.
allow adjustment of table position on column;
tightens to lock table position.
R
-5-