Grizzly T33682 Instructions

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction
The Model T33682 holds bits, chucks and other
equipment for your drill press. It easily mounts to a
drill press column up to 4
be conveniently rotated 360° during operations for
closer access.
The tray size is 11 ⁄
3
8
mounting holes for bit sizes
64 increments.
th
Figure 1. Model T33682.
To reduce risk of serious
injury, read this entire
manual
drill press tray. Read and
understand instructions/
safety warnings provided
by manufacturer for any
machine or tool you plan to
use with this tray.
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
⁄ " in diameter, and can
3
4
" across and has pre-drilled
⁄ " to ⁄ " in 32
1 1
16 2
BEFORE
COPYRIGHT © JULY, 2023 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
(FOR MODELS MFD. SINCE 07/23) #JM22675 PRINTED IN CHINA
***Keep for Future Reference***
DRILL PRESS TRAY
Inventory
Contents (Figure 2)
A. Tool Tray ..................................................... 1
B. Z-Bar
C. Z-Bar
D. Key Hose Clamps 5" .................................. 2
E. Z-Bar Adapter ............................................. 1
F.
Mounting Block ........................................... 1
and
nd
A
F
using
MODEL T33682
INSTRUCTIONS
⁄ " ..................................................... 1
1
2
⁄ " ..................................................... 1
3
8
B
E
Figure 2. Inventory.
Qty
C
D
V1.07.23