Before Installing Finsgateway - Omron SYSMAC CS Series Operation Manual

Installation

2-1-3 Before Installing FinsGateway

Step 1: Backing Up the
FinsGateway Settings
1, 2, 3...
The following drive and directly are set by default.
C:\Program Files\Omron\CX-Process Tool
No changes will be needed when installing the CX-Process Tool into the
above directory.
To change the above drive, click the Browse Button and select the drive and
directory as required.
10. Click the Next Button. The following Select Program Folder Dialog Box will
appear. Select the program directory. The default program directory is
Omron\CX-Process Tool.
11. Click the Next Button. The Start Copying Files Dialog Box will appear.
Check the target directory and click the Next Button.
Installation of the CX-Process Tool will start. If installation is completed with
no errors, the Setup Complete Dialog Box will appear.
12. Click the Finish Button.
13. The CX-Process Tool will start up now by selecting Start, Program, Omron,
CX-Process Tool, and CX-Process Tool from the menu, if the FinsGate-
way (embedded version 3 or 2003) has been already installed.
If FinsGateway Version 2 or earlier has been installed already, start from Step 1:
Backing Up the FinsGateway Settings.
If FinsGateway is being installed on the computer for the first time, skip to Step 5:
ComCtl32.dll Update.
If necessary, back up the previous FinsGateway settings, as follows:
Note If FinsGateway is removed (uninstalled) without backing up the setting data, the
previous setting data will all be lost.
1. Execute the Backup/Restore FinsGateway Setting Data program on the
CD.
Section 2-1
49