Operations; Creating Function Blocks - Omron SYSMAC CS Series Operation Manual

Operations

Step 7: Actual Operation
1, 2, 3...
1-8

Operations

1-8-1 Creating Function Blocks

Item
Creating a new function block navigation or
multi-node folder
Creating function block files
Registering function blocks
Creating software connection between function
blocks
3. Check the connections with the CX-Process Tool (using Start from the Vali-
date Action Menu). (See page 243.)
4. Tune parameters such as PID constants and make SP settings with the CX-
Process Tool.
1. Make any necessary settings and adjustments such as PID tuning with the
CX-Process Tool, SCADA software, the CX-Process Monitor, or the CX-
Process Monitor Plus.
2. Monitor the PV and all alarms from SCADA software, the CX-Process Moni-
tor, or the CX-Process Monitor Plus.
Note The CX-Process Monitor can be used for the Loop Control Units only.
It cannot be used for the LCBjjs.
New from the File Menu
Insert – Insert Node from the Settings Menu
1. Select the function block group folder.
2. Select Insert – Insert Function Block from the
Settings Menu, or
right-click on the block diagram and select
Register – Field Terminal/Sequence
Control/Control Block.
1. Select the folder for block diagram 1.
2. Select Edit – Block Diagram from the Settings
Menu.
3. Select the function block to be pasted.
4. Click the right mouse button at the pasting
position. Select Paste Function Block from the
pop-up menu.
5. Select the block and change the position.
6. Click the start point of the connection and
double-click the end point.
Menu item
Section 1-8
Page
90
92
100
106
39