Finding The Scanner; Recalibrating The Paperport Mx Scanner - Visioneer PaperPort MX User Manual

F S
INDING THE CANNER
If the scanner does not start when you insert a page, the computer may not
know that the scanner is connected. You can have the software
automatically find the scanner.
To find the scanner:
1. Click the Settings button on the Command Bar, or from the Edit
menu, choose Preferences.
2. Click the Scanner button. If you're using Windows 95, click the
Scanner Setup tab.
3. Click the Setup button.
4. Click Find Scanner.
The PaperPort software searches for the scanner and displays its
version on the dialog box.
5. Click OK.
When you click OK, you will see either a "successfully connected" message or
an error message. If you get an error message, see "PaperPort Scanner Not
Found" on page 26 for more information. If you get a message that the scanner
is successfully connected, you are ready to scan.
R
ECALIBRATING THE
Calibrating the scanner fine-tunes the amounts of black and white that
appear on the scanned image. After using the scanner for awhile,
recalibration may be necessary if you:
Notice that scanned items have black-or-white lines running through
them.
Receive a message telling you that the scanner needs to be calibrated.
F
INDING THE
P P S
APER ORT MX
33
S
CANNER
CANNER