Table of Contents
Advertisement
3. Plug the other end of the serial cable into the round port on the back
of the scanner.
Note that the plug fits only one way. If it does not attach easily, make
sure that you are plugging it in correctly. Do not force the plug into
the connection.
4. Plug the power adapter into an AC (wall) outlet.
5. Plug the power cable into the power jack on the back of the scanner.
Power cable
Listen for a short hum from the scanner. This sound indicates that the
scanner is receiving power.
6. Place the scanner at a convenient place on your desk—for example,
between your keyboard and monitor.
S
Y
P
P
ECURING
OUR
APER
ORT
Your PaperPort scanner has a built-in security connector to enable you to lock
down and protect your valuable equipment. The security connector is located
on the rear of the scanner and is identified by a small molded icon.
The MicroSaver Security System is a cable and locking device custom
designed to work with this connector. The locking device inserts into the
connector, and the steel cable wraps around and secures to a desk leg or
other immovable object.
MicroSaver is available at major computer resellers. Or, call Kensington
Microwave Limited at 1-415-572-2700 or 1-800-535-4242 (in the U.S.
and Canada) for more information.
C
P
ONNECTING THE
APER
Serial cable
S
CANNER
11
P
S
ORT MX
CANNER
Advertisement
Table of Contents
