The Visioneer® Patriot H60/80 Scanner Features - Visioneer PATRIOT H60 User Manual

W
ELCOME
®
T V
HE ISIONEER
1
1. Input Tray—Holds the documents in the Automatic Document Feeder for scanning.
● Extension—Pull out to support various document lengths.
● Paper Guide Switch—Push up to allow the paper guides to adjust wider for dot matrix printer paper.
● Paper Guides—Slide to adjust to document width.
2. Automatic Document Feeder—Feeds documents through the scanner during scanning.
●
ADF Cover Release—Press to open the Automatic Document Feeder.
3. Control Panel—OneTouch scanning controls.
●
LCD Screen—Shows the current scan settings
●
Function Buttons—Select the scan setting for the OneTouch buttons. Press the up or down arrow to
cycle through the settings.
●
Simplex Button—Press to scan single-sided documents.
❍
Firmware version 1.07 or higher — After a double feed is detected and scanning has been paused,
press the button for less than 1.5 seconds to ignore the error and continue scanning. Press the
button for over 1.5 seconds to stop scanning and cancel the job.
●
Duplex Button—Press to scan double-sided documents.
❍
Firmware version 1.07 or higher — After a double feed is detected and scanning has been paused,
press the button for less than 1.5 seconds to ignore the error and continue scanning. Press the
button for over 1.5 seconds to stop scanning and cancel the job.
●
Status Light / Power Button—Turns the scanner's power on/off and indicates the scanner's status.
4. Output Tray—Holds documents after being scanned.
●
Paper Stop (Short Documents)—Flip up to keep short items stacked neatly in the output tray after
scanning. Slide to adjust to the length of the scanned documents.
●
Extension—Flip out to support various document lengths.
●
Paper Stop (Regular Documents)—Flip up to keep regular documents stacked neatly in the output tray
after scanning.
S U ' G
CANNER SER S UIDE
P H60/80 S
ATRIOT
3
2
4
V
F
CANNER EATURES
5
® TM
P H60 / H80
ISIONEER ATRIOT
9