What You Need - Visioneer PaperPort MX User Manual

4
C 1: W
HAPTER ELCOME
W Y N
HAT OU EED
To use the scanner and software, you need the following:
IBM PC (or 100-percent compatible) 486 or higher for PaperPort 4.0;
an IBM PC 386 or higher for PaperPort 3.6.
Microsoft Windows 95, Windows 3.1, or Windows for Workgroups 3.11.
8 megabytes (MB) or more of internal memory (RAM), or 4 MB if you
have your own OCR software and decide not to install the OCR
software included with the PaperPort software.
20 MB of free hard disk space if your computer is running Windows 95;
12 MB of free hard disk space if your computer is running
Windows 3.1.
An available serial port (COM1, COM2, COM3, or COM4).
If your computer does not have an available COM port, please read the
section below.
A VGA or SVGA monitor. Recommended settings for your monitor are
256 colors or more, and 640 by 480 resolution.
A CD-ROM drive to install the software; however, if your computer
does not have a CD-ROM drive, you can get disks from Visioneer.