Ip Subnet-Based Vlan - Planet Networking & Communication XGS-6320 Series User Manual

4.3.7.2 IP Subnet-based VLAN

The IP subnet to VLAN ID mappings can be configured here. This page allows adding, updating and deleting IP
subnet to VLAN ID mapping entries and assigning them to different ports.
The displayed settings are:
Object
 Delete
 IP Address
 Mask Length
 VLAN ID
 Port Members
 Adding a New IP
subnet-based VLAN
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
Auto-refresh :
Click to refresh the page immediately.
:
Description
To delete a mapping, check this box and press save. The entry will be deleted in
the stack.
Indicates the subnet's IP address (Any of the subnet's host addresses can be
also provided here, the application will convert it automatically).
Indicates the subnet's mask length.
Indicates the VLAN ID the subnet will be mapped to. IP Subnet to VLAN ID is a
unique matching.
A row of check boxes for each port is displayed for each IP subnet to VLAN ID
mapping entry. To include a port in a mapping, simply check the box. To remove
or exclude the port from the mapping, make sure the box is unchecked. By
default, no ports are members and all boxes are unchecked.
Click to add a new IP subnet to VLAN ID mapping entry. An empty row is added
to the table, and the mapping can be configured as needed. Any IP
address/mask can be configured for the mapping. Legal values for the VLAN ID
are 1 to 4095.
The IP subnet to VLAN ID mapping entry is enabled when you click on "Save".
The button can be used to undo the addition of new mappings. The maximum
possible IP subnet to VLAN ID mappings are limited to 128
146
User's Manual of XGS-6320 Managed Switches