Table of Contents
Advertisement
Modification Buttons
Buttons
: Click to apply changes
Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
Auto-refresh
:
: Click to refresh the page
: Click to
4.3.6 Private VLANs
4.3.6.1 Private VLAN Configuration
The Private VLAN membership configurations for the switch can be monitored and modified here. Private VLANs can be added
or deleted here. Port members of each Private VLAN can be added or removed here.
Private VLANs are based on the source port mask, and there are no connections to VLANs. This means that VLAN IDs and
Private VLAN IDs can be identical.
A port must be a member of both a VLAN and a Private VLAN to be able to forward packets. By default, all ports are VLAN
unaware and members of VLAN 1 and Private VLAN 1.
A VLAN unaware port can only be a member of one VLAN, but it can be a member of multiple Private VLANs. The VLAN Port
Status screen in
Figure 4-3-6-1
Figure 4-3-6-1: Private VLAN Membership Configuration page screenshot
You can modify each VLAN Translation mapping in the table using the following
buttons:
: Edits the mapping row.
: Deletes the mapping.
: Adds a new mapping.
remove all VLAN Translation mappings.
appears.
User's Manual of XGS-6320 Managed Switches
141
Advertisement
Table of Contents
