Table of Contents
Advertisement
lrtfinite
816
Key Telephone
System
SYSTEM PARAMETERS PROGRAMMING
System
Parameters
Programming
(Cont'a)
730.5
PBX DIALING
CODES
gramming Steps
If the system is in the Programming mode,
continue using program codes. If starting to
program here, enter the Programming mode
f&t (See Paragraph 700.4).
To enter PBX Dialing codes:
a Dial an asterisk [*I and 1301 on the dial pad.
b. Press the program button to assign the
first code. CO line 1 button is automat-
ically lit for programming the i&t
code
number.
c. Enter the one- or two-digit number on the
dial pad.
d. Press HOLD to enter data, The next pro-
gram button will light for entering further
PBX codes.
Description
Four one- or two-digit PBX access codes can be
entered into system memory.
When dialed,
they signal the system that an access code is
being dialed and that toll restriction is to be
applied at the next dialed digit. Otherwise. toll
restriction does not apply. TWs allows dialing
0fPBXextensions 100, 110, 111, etc.
A one-digit
code
may be used.
Default:
By default, no codes are assigned.
Issue
1, January
1992
730-7
Advertisement
Table of Contents
