Table of Contents
Advertisement
Irtj%-tite
816
Key Telephone
System
CO LINE ATI'RIBUTES
PROGBWMING
CO Line Attributes
Programming
(Cont'd)
720.3
CO LINE RINGING
- DAY
ProgrammfnfE
Steps
Description
lf the system
is in the Programming
mode,
continue
using
program
codes.
If starting
to
program
here,
enter
the Programming
mode
first (See Paragraph
700.4).
To change
which
stations
ring:
a. Dial an asterisk
['] and [ 131 on the dial pad
for day ringing
stations.
b. Press the
outside
line that
is to be pro-
grammed.
Telephones
can be assigned
to receive incom-
ing outside
line rir@ng
during
the day Tele-
phones
that
ring
during
the
day
do not
automatically
ring at night.
They require
night
ringing
programming.
A CO line can be assigned
to ring at a station
where access is denied. That station
can trans-
fer the call but cannot
flash
and regain
dial
tone.
c. Then
press
station
buttons
for stations
that
are to ring on that line (each button
All lines can be assigned
to ring at all stations
or no phones
can be assigned
to ring on a line.
Default:
E3y default,
all lines ring at the Atten-
dant station
(1).
d. When all stations
have been entered,
press
HOLD to enter data.
Preliminary
Issue, November
1991
720-3
Advertisement
Table of Contents
