Cellular Plmn Configuration - ZyXEL Communications NR/FWA Outdoor Series User Manual

The following table describes the fields in this screen.
Table 20 Network Setting > Broadband > Cellular Band
LABEL
Access Technology
Preferred Access
Technology
Preferred Service
Domain
Band Management
Band Auto Selection Slide this to the right to enable automatic frequency band selection as provided by your
Cancel
Apply

7.7 Cellular PLMN Configuration

Each service provider has its own unique Public Land Mobile Network (PLMN) number. Either select PLMN
Auto Selection to have the Zyxel Device connect to the service provider using the default settings on the
SIM card or manually view available PLMNs and select your service provider.
Click Network Setting > Broadband > Cellular PLMN. The screen appears as shown next.
Figure 53 Network Setting > Broadband > Cellular PLMN
Chapter 7 Broadband
DESCRIPTION
Select the Access Technology which you want the Zyxel Device to use and click Apply to
save your settings.
Otherwise, select Auto to have the Zyxel Device connect to an available network using the
default settings on the SIM card. If the currently registered mobile network is not available or
the mobile network's signal strength is too low, the Zyxel Device switches to another
available mobile network.
Choose the service domain you want to use in the mobile network.
The CS (Circuit Switching) domain handles voice calls. The PS (Packet Switching) domain
handles data sessions.
Choose Combine to use both PS (Packet Switching) and CS (Circuit Switching) domain.
Choose PS only to use only the PS domain.
service provider. Otherwise, slide to disable and select the cellular bands to use for the Zyxel
Device's WAN connection.
Click this to exit this screen without saving.
Click this to save your changes.
NR/FWA Outdoor Series User's Guide
83