Plmn Configuration - ZyXEL Communications LTE Series User Manual

The following table describes the fields in this screen.
Table 10 Network Setting > Broadband > Cellular Band
LABEL
Access Technology
Preferred Access
Technology
Band Management
Band Auto Selection Select the LTE bands to use for the Zyxel Device's WAN connection. Click to enable (
Cancel
Apply

5.5 PLMN Configuration

Each service provider has its own unique Public Land Mobile Network (PLMN) number. Either select PLMN
Auto Selection to have the Zyxel Device connect to the service provider using the default settings on the
SIM card or manually view available PLMNs and select your service provider.
Click Network Setting > Broadband > Cellular PLMN. The screen appears as shown next.
Figure 24 Network Setting > Broadband > Cellular PLMN
The following table describes the labels in this screen.
Table 11 Network Setting > Broadband > Cellular PLMN
LABEL
PLMN Management
PLMN Auto Selection
Cancel
Apply
After selecting to disable the following warning appears. Click OK to continue.
Chapter 5 Broadband
DESCRIPTION
Select the type of the network (4G, 3G, or 2G) to which you want the Zyxel Device to
connect and click Apply to save your settings.
Otherwise, select Auto to have the Zyxel Device connect to an available network using the
default settings on the SIM card. If the currently registered mobile network is not available or
the mobile network's signal strength is too low, the Zyxel Device switches to another
available mobile network.
automatic LTE frequency band selection as provided by your service provider. Otherwise,
select disabled.
Click this to exit this screen without saving any changes.
Click this to save your changes.
DESCRIPTION
Click to enable (
available mobile network.
Select disabled to display the network list and manually select a preferred network.
Click Cancel to exit this screen without saving any changes.
Click Apply to save your changes back to the Zyxel Device.
LTE Series User's Guide
39
) and have the Zyxel Device automatically connect to the first
)