ZyXEL Communications NR/FWA Outdoor Series User Manual page 268

Table 115 Maintenance > Diagnostic (continued)
LABEL DESCRIPTION
After clicking Start Test, the result for maximum upstream test when the Role is Sender, or
maximum downstream test when the Role is Receiver, is displayed.
Example 1. When the Role is Receiver, i is 2 intervals, m is 4 intervals and Test Sub Interval is 6
seconds, the following example measurement intervals are displayed in the info area.
[Info] Sub-Interval[1](sec): 6, Delivered(%): 100.00, Loss/OoO/Dup: 0/54/5123,
OWDVar(ms): 0/5/39, RTTVar(ms): 0-30, Mbps(L3/IP): 1.04
[Info] Sub-Interval[2](sec): 12, Delivered(%): 99.96, Loss/OoO/Dup: 5/3/5887, OWDVar(ms):
0/5/19, RTTVar(ms): 0-20, Mbps(L3/IP): 1.19
[Info] Sub-Interval[3](sec): 18, Delivered(%): 99.97, Loss/OoO/Dup: 4/2/5815, OWDVar(ms):
1/5/27, RTTVar(ms): 0-19, Mbps(L3/IP): 1.18
[Info] Sub-Interval[4](sec): 24, Delivered(%): 99.99, Loss/OoO/Dup: 1/0/5450, OWDVar(ms):
1/6/21, RTTVar(ms): 0-23, Mbps(L3/IP): 1.10
[Info] Downstream Summary Delivered(%): 99.99, Loss/OoO/Dup: 13/105/55831,
OWDVar(ms): 0/6/122, RTTVar(ms): 0-111, Mbps(L3/IP): 1.13
[Info] Downstream Minimum One-Way Delay(ms): 9 [w/clock difference], Round-Trip
Time(ms): 25
[Info] Downstream Max[1-2] Mbps(L3/IP): 1.19, Mbps(L2/Eth): 1.21, Mbps(L1/Eth): 1.53,
Mbps(L1/Eth+VLAN): 1.59
[Info] Downstream Max[3-4] Mbps(L3/IP): 1.18, Mbps(L2/Eth): 1.42, Mbps(L1/Eth): 1.79,
Mbps(L1/Eth+VLAN): 1.86
This means that for the first set of two (6 seconds) test interval (1 to i), the best result of the
download test is 1.19 Mbps. On the second set of two (6 seconds) test interval (i + 1 to m),
the best result of the download test is 1.18 Mbps.
Example 2. When the Role is Receiver, i is 0 interval, m is 2 intervals and Test Sub Interval is 5
seconds, the following example measurement interval is displayed in the info area. This
means that for a set of two (5 seconds) test interval (i + 1 to m), the best result of the
download test is 1.20 Mbps.
[Info] Sub-Interval[1](sec): 5, Delivered(%): 99.97, Loss/OoO/Dup: 1/1/1726, OWDVar(ms):
0/4/17, RTTVar(ms): 0-21, Mbps(L3/IP): 1.04
[Info] Sub-Interval[2](sec): 10, Delivered(%): 100.00, Loss/OoO/Dup: 0/1/1982,
OWDVar(ms): 0/4/22, RTTVar(ms): 2-24, Mbps(L3/IP): 1.19
[Info] Downstream Summary Delivered(%): 99.98, Loss/OoO/Dup: 7/19/19013, OWDVar(ms):
0/5/22, RTTVar(ms): 0-26, Mbps(L3/IP): 1.15
[Info] Downstream Minimum One-Way Delay(ms): 11 [w/clock difference], Round-Trip
Time(ms): 26
[Info] Downstream [Info] Maximum Mbps(L3/IP): 1.19, Mbps(L2/Eth): 1.41, Mbps(L1/Eth): 1.79,
Mbps(L1/Eth+VLAN): 1.85
Start Test Click this to perform the selected test method.
Chapter 34 Diagnostic
NR/FWA Outdoor Series User's Guide
268