Cellular Ip Passthrough - ZyXEL Communications NR/FWA Outdoor Series User Manual

7.8 Cellular IP Passthrough

Enable IP Passthrough to allow Internet traffic to go to a LAN device behind the Zyxel Device without
going through NAT. See
Device.
Note: This screen is not available for models that support the IP Passthrough settings in the
Network Setting > Broadband > Cellular APN > Edit screen.
Click Network Setting > Broadband > Cellular IP Passthrough to display the following screen.
Figure 56 Network Setting > Broadband > Cellular IP Passthrough
Note: Changing the IP Passthrough settings may affect the network setting of client devices.
After selecting to enable the following warning appears. Click OK to continue.
Figure 57 Network Setting > Broadband > Cellular IP Passthrough > Enable Warning
The following table describes the fields in this screen.
Table 23 Network Setting > Broadband > IP Passthrough
LABEL
IP Passthrough Management
IP Passthrough IP Passthrough allows a LAN computer on the local network of the Zyxel Device to have access to
Chapter 7 Broadband
Section 7.1.2 on page 72
DESCRIPTION
web services using the public IP address. When IP Passthrough is configured, all traffic is forwarded
to the LAN computer and will not go through NAT.
NR/FWA Outdoor Series User's Guide
for more information about IP passthrough on the Zyxel
86