ZyXEL Communications NR/FWA Outdoor Series User Manual page 251

The following table describes the labels in this screen.
Table 109 Maintenance > E-mail Notification > Add
LABEL DESCRIPTION
Mail Server Enter the server name or the IP address of the mail server for the email address specified in the
Address Account e-mail Address field.
If this field is left blank, reports, logs or notifications will not be sent through email.
Port Enter the same port number here as is on the mail server for mail traffic.
Authentication Enter the user name. You can use up to 32 printable characters except [ " ], [ ` ], [ ' ], [ < ], [ > ], [
Username ^ ], [ $ ], [ | ], [ & ], or [ ; ]. Spaces are allowed. This is usually the user name of a mail account
you specified in the Account email Address field.
Authentication Enter the password associated with the user name above.
Password
Account e-mail Enter the email address that you want to be in the from or sender line of the email notification
Address that the Zyxel Device sends.
If you activate SSL/TLS authentication, the email address must be able to be authenticated by
the mail server as well.
Connection Select SSL to use Secure Sockets Layer (SSL) or Transport Layer Security (TLS) if you want
Security encrypted communications between the mail server and the Zyxel Device.
Select STARTTLS to upgrade a plain text connection to a secure connection using SSL/TLS.
Select NONE to disable the connection security.
Cancel Click this button to begin configuring this screen afresh.
OK Click this button to save your changes and return to the previous screen.
Chapter 30 Email Notification
NR/FWA Outdoor Series User's Guide
251