Changing Security On A Wifi Network - ZyXEL Communications NR/FWA Outdoor Series User Manual

However, the WiFi network is only for configuring the Zyxel Device. Remember to turn it off after all
configurations are done.
Figure 29 Zyxel Device Configuration through WiFi Connection
See the label on the Zyxel Device for the WiFi network settings and then connect manually to the Zyxel
Device. Alternatively, you can connect to the Zyxel Device WiFi network using WPS.

5.2.1 Changing Security on a WiFi Network

This example changes the default security settings of a WiFi network to the following:
SSID
Security Mode
Pre-Shared Key
802.11 Mode
Go to the Network Setting > Wireless > General screen. Select More Secure as the security level and
1
WPA2-PSK as the security mode. Configure the screen using the provided parameters. Click Apply.
Chapter 5 Web Interface Tutorials
Example
WPA2-PSK
DoNotStealMyWirelessNetwork
802.11b/g/n Mixed
NR/FWA Outdoor Series User's Guide
43