Changing Security On A Wifi Network - ZyXEL Communications AX Series User Manual

Figure 54 WiFi Network Setup
See the label on the Zyxel Device for the WiFi network settings and then connect manually to the Zyxel
Device. Alternatively, you can set up a WiFi network using WPS. See

5.3.1 Changing Security on a WiFi Network

This example changes the default security settings of a WiFi network to the following:
SSID
Security Mode
Pre-Shared Key
802.11 Mode
Go to the Network Setting > Wireless > General screen. Select More Secure as the security level and
1
WPA2-PSK as the security mode. Configure the screen using the provided parameters. Click Apply.
Chapter 5 Tutorials
Example
WPA2-PSK
DoNotStealMyWiFi
802.11b/g/n Mixed
AX/DX/EX/PX Series User's Guide
76
Section 5.3.2 on page 78.