Advertisement
(G-7)
2,3
*CI—C)=
EDITSEARCH Cy)
=
24
Recording
a Picture Using Automatic
-*
Adjustments
To Re-record a Previously Recorded
P
(G-7)
1 Turn STANDBY to STANDBY to set the
camcorder to the standby mode.
2 Look in the viewfinder and find the point
from where you want to begin the
recording by:
Keeping the + side of EDITSEARCH
pressed to advance the picture at the
normal playback speed, or the — side to
reverse the picture.
3 At the desired point, release EDITSEARCH.
4 Press STARTI/STOP to start recording.
The picture is connected smoothly after the
prerecorded portion even if STANDBY
is turned
up and down, or even if the power is turned
off and on again, provided that the tape is not
removed.
To stop
Turn STANDBY
to LOCK.
Advertisement
