Advertisement
(G-1)
SHUTTER SPEED
Recording a Picture Using
Automatic. Adjustments
Before recording "once-only" events, we
strongly recommend making a trial
recording and checking that everything is
working properly.
(G-1)
1
Hold the camcorder as illustrated.
Put your hand through the grip strap and
check that your thumb can easily touch
START/STOP.
Make sure that the viewfinder is pulled out.
Remove the lens cap.
4 while Pressing the green button, set
POWER to CAMERA.
Turn STANDBY to STANDBY.
"STBY" and the autofocus frame appear in
the viewfinder.
If the autofocus frame does not appear,
press FOCUS.
If the shutter speed indication appears in
the viewfinder, press SHUTTER SPEED
repeatedly until] it goes out.
The camcorder is now in the standby
mode, and focus is adjusted automatically
inside the frame (autofocus adjusting
tange). Do not turn or stop the focus ring
forcibly.
Keep the W side of the power zoom button
pressed.
Press START/STOP.
"REC" appears and the red lamp lights up
in the viewfinder. The camcorder is now
recording.
To pause (to stop momentarily)
Press START/STOP again.
"STBY" appears in the viewfinder. The
camcorder is in the standby mode again.
To stop
Turn STANDBY to LOCK and set POWER
to
OFF.
21
Advertisement
