Advertisement
(B-2)
{B-3)
(B-4)
Mount the battery pack on the camcorder. (B-2)
1 Lift up the viewfinder.
2 Align the right side of the battey pack with
the line on the camcorder.
3 Slide the battery pack to the right.
Note
Make sure the battery fits completely on the
mounting surface of the camcorder. Imperfect fit
may damage the projections on the camcorder.
Battery life
A fully charged battery pack lasts for:
NP-55
NP-66H
NP-77
NP-77H
70
120
140
170
(Approx. minutes, continuous recording when
used
indoors)
When the battery becomes weak (B-3)
The <X] indication and red lamp blink slowly
in the viewfinder. Replace the battery pack
with a fully charged one when they blink
rapidly.
To remove the battery pack (B-4)
While sliding up the BATT knob, slide the
battery pack to the left and pull it out as
illustrated.
Other options for charging
« AC-V55 AC power adaptor: You can charge two
battery packs one after another.
* BC-55, BC-77 portable battery charger: You can
charge a battery pack on 100-240 V AC.
¢ DC-V30 car battery charger: You can charge a
battery by connecting the car battery charger to
the cigarette lighter socket. This battery charger
can also supply power for Sony 8 mm video
equipment that operates on a battery pack.
« NP-4000 rechargeable battery pack: You can use
it for long outdoor recording. The DCP-55 DC
pack is required for the connection (not supplied).
11
Advertisement
