Advertisement
(C-2)
(C-3)
(C-4)
14
How to Prepare
Pack
Have a sufficient battery pack power to do 2
or 3 times as much recording than you have
planned. (C-1)
"Battery life' as indicated in the instruction
manual or catalogue of the camcorder is
measured by the continuous recording time of
the camcorder, placed at a room temperature
using a full-charged battery.
Battery life is shorter in a cold climate (C-2)
Battery efficiency is decreased and the battery
will be used up more quickly.
Tum the STANDBY switch of the camcorder to
LOCK when not recording to save battery
power. (C-3)
A smooth transition between scenes can be
made even if recording is stopped and started
again.
While positioning the subject or selecting an
angle, by viewing through the viewfinder, and
in using autofocus the battery is being
expended. The battery is also being expended
when a tape is inserted or removed.
When the Rechargeable Battery Pack
should be Replaced
(C-4)
When the <\J mark in the viewfinder changes
from slow blinking to rapid blinking while you
are recording,
Turn off the power switch of the camcorder
and replace the battery pack. Leave the tape in
the camcorder in order to obtain a smooth
transition between scenes after the battery
pack is replaced.
Advertisement
