Advertisement
(E-1)
Inserting a Tape
(E-1)
1
Make sure a power source is connected.
2 While sliding the lid lock in the direction of
the arrow, lift up the lid fully.
oo Press EJECT.
The lip of the cassette compartment will
automatically lift up and open toward you.
A ~S Insert the tape with the window facing out.
Press the PUSH mark on the cassette
compartment cover to close it.
6 Close the lid.
Ejecting the Tape
Make sure that a power source is
connected.
While sliding the lid lock in the direction of
the arrow, lift the lid up fully.
Press EJECT.
The lip of the cassette compartment will lift
up and automatically open toward you.
Take out the tape and press the PUSH
mark on the comparment to close it.
Close the lid.
Preventing Accidental Erasure
(E-2)
Slide out the red tab on the tape to protect
the recording.
To re-record on this tape, slide the tab back in.
_
LX}
wo
ey
a
Notes on handling tapes
* Never insert anything in the small holes on the
rear of the tape. These holes are used to sense
the type of tape, thickness of tape, or if the tab
is out or in, etc.
* Store tapes in their cases and keep them in an
upright position to prevent intrusion of dust and
uneven winding.
Advertisement
