Table of Contents
Advertisement
Hazardous Location Approvals
Hazardous Location Approvals
T
ATEX (Explosion Protection Directive)
SIMATIC NET products meet the requirements of the EC directive: 94/9/EC "Equipment and
Protective Devices for Use in Potentially Explosive Atmospheres".
ATEX classification:
II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
The products meet the requirements of the standards
EN 60079-15: 2010 (electrical apparatus for potentially explosive atmospheres; Type of protection
"n")
EN 60079-0:2009 (Explosive atmospheres - Part 0: Equipment - General requirements)
cULus for Hazardous Locations
cULus Listed I. T. E. FOR HAZ. LOC.
Underwriters Laboratories Inc. complying with
•
UL 60950-1 (Information Technology Equipment)
•
ANSI/ISA 12.12.01-2007
•
CSA C22.2 No. 213-M1987
Approved for use in
Cl. 1, Div. 2, GP A, B, C, D T4
Cl. 1, Zone 2, GP IIC T4
Cl. 1, Zone 2, AEx nC IIC T4
FM
The product meets the requirements of the standards:
•
Factory Mutual Approval Standard Class Number 3611
•
FM Hazardous (Classified) Location Electrical Equipment:
Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and
5-4 Certification
Note: The hazardous location approvals in this section apply to the WS-AP3765 only.
Warning: When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that
the associated conditions are adhered to.
"Use of subassemblies/modules in a Zone 2 Hazardous Area".
This document can be found on the Internet at the following URL:
http://support.automation.siemens.com/WW/
> Product Support > Industrial Communication
Enter the document identification number A5E00352937 as the search term.
Advertisement
Table of Contents
