Fitting The Mounting Plate To A Din Rail; Mounting Plate With Fittings For Din Rail Mounting - Enterasys WS-AP3765i Installation Manual

Mounting with Mounting Bracket

Fitting the Mounting Plate to a DIN Rail

To fit the mounting plate to a DIN rail:
1. Place the mounting plate with the two catches (Position A in
the DIN rail.
Figure 2-10
2. Pull down the DIN rail sliding catch (Position B in
against the DIN rail until the sliding catch engages.
2-10 Mounting the Outdoor Access Point

Mounting Plate with Fittings for DIN Rail Mounting

A
A
B
Figure 2-10) on the upper edge of
Figure 2-10) and press the mounting plate