Positioning The Seat - Toro 30487N Operator's Manual

1. Side panel cover
On the face of the SCM are 11 LEDs that illuminate to
indicate various system conditions. Seven of these lights can
be used by the operator for system diagnosis. Refer to
30 for a description of what each light means. For details
on using the rest of the SCM functions, refer to the Service
Manual, available through your Authorized Toro Distributor.
1. High temperature shutdown—the engine temperature has
exceeded safe levels and the engine has been shut down.
Check the cooling system.
2. High temperature warning—the engine temperature is
approaching unsafe levels and the mower deck has been
shut down. Check the cooling system.
3. Operator is in the seat
4. The PTO is On
5. The parking brake is not engaged
6. Controls are in Neutral
7. The SCM is receiving power and is operational
Figure 29
2. Latches
Figure 30

Positioning the Seat

Changing the Seat Position
The seat can move forward and backward. Position the seat
where you have the best control of the machine and are most
comfortable.
1. To adjust, move the lever sideways to unlock the seat
(Figure
Figure
1. Back rest knob
2. Seat suspension knob
2. Slide the seat to the desired position and release lever
to lock in position.
3. Verify that the seat has locked into place by attempting
to move it back and forth.
Changing the Seat Suspension
The seat can be adjusted to provide a smooth and comfortable
ride. Position the seat where you are most comfortable.
Without sitting on the seat, turn the knob in front either
direction to provide the best comfort
30
31).
Figure 31
3. Lumbar support
adjustment knob
4. Seat position adjustment
lever
(Figure 31).