Warnings - Graco LineLazer GM 3500 Instructions-Parts List Manual

Gasoline-powered airless linestriper
Table of Contents

Advertisement

Symbols
Warning
Symbol
Caution
Symbol
This symbol alerts you to the possibility of serious
This symbol alerts you to the possibility of damage to
injury or death if you do not follow the instructions.
equipment if you do not follow the instructions.
EQUIPMENT
MISUSE
HAZARD
Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.
This equipment is for professional use only.
Read all instruction manuals, tags, and labels before operating the equipment.
Use the equipment only for its intended purpose. If you are not sure, call your distributor.
Do
not alter
or
modify this equipment.
Check equipment daily. Repair or replace wom or damaged parts immediately.
Do not exceed the maximum working pressure of the lowest rated system component. Refer to the
Technical Data on page
50
for the maximum working pressure
of this equipment.
Use fluids and solvents which are compatible with the equipment'wetted parts. Refer
to the Tech-
nical
Data
section of
all
equipment manuals. Read the fluid and solvent manufacturer's warnings.
D
Do not use hoses to pull equipment.
Route hoses away from traffic areas, sharp edges, moving parts, and
hot surfaces. Do not expose
Graco hoses to temperatures above 82°C (180°F) or below -40°C (40°F).
Do not l i pressurized equipment.
B
Comply with all applicable local, state, and national fire, electrical, and safety regulations.
B
Wear hearing protection when operating this equipment.
b
Do not use 1,l ,I-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or
fluids containing such solvents in pressurized aluminum equipment. Such use could result in a
chemical reaction, with the possibility of explosion.
4
308-082

Advertisement

Table of Contents
loading

This manual is also suitable for:

231-132231-140

Table of Contents