Field &Wiring Harness - Graco LineLazer GM 3500 Instructions-Parts List Manual

Field & Wiring Harness
NOTE: Refer to Fig. 43. 2 . Pull the caps (A) off the wire sc :rews (57) in
places on the fieid. Loosen the screws and release
both
1.
Loosen the four setscrews (62) holding the field.
(70)
to the clutch housing (61). Unplug the wiring harness
the wires
(58).
(58)
from under the engine mounting plate. Pull the
field out to expose the black and white wires
(58).
3. Skip ahead to Reassembly, page 38, Step
4.
57 58
A
Fig.
43 w
36 308-082