Table of Contents
Advertisement
Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The
exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks.
When these symbols appear in the body of this manual or on warning labels, refer back to these Warnings.
Product-specific hazard symbols and warnings not covered in this section may appear throughout the body of this
manual where applicable.
MOVING PARTS HAZARD
Moving parts can pinch, cut or amputate fingers and other body parts.
•
Keep clear of moving parts.
•
Do not operate equipment with protective guards or covers removed.
•
Before checking, moving, or servicing equipment, relieve pressure and disconnect all power
sources.
ELECTRIC SHOCK HAZARD
This equipment must be grounded. Improper grounding, setup, or usage of the system can cause
electric shock.
•
Turn off and disconnect power before servicing equipment.
•
Connect only to grounded electrical outlets.
•
Ensure ground prongs are intact.
•
Do not expose to rain. Store indoors.
•
All electrical wiring must be done by a qualified electrician and comply with all local codes and
regulations.
3A5202G
WARNING
Warnings
3
Advertisement
Table of Contents
