Table of Contents
Advertisement
r
To reduce the risk of serious injury always follow
the Pressure Relief Procedure on page 7,
before.checking, adjusting, cleaning, or shutting
down the LineLazer.
A
CAUTION
For detailed engine maintenance and specifications,
refer to the separate HONDA engine manual.
Daily: Check the engine oil level and fill as necessary.
Daily: Check and fill the gas tank.
A
After the first 20 hours of operation
and each 100
hours thereafter: Change the oil.
Weekly: Remove the air filter cover and clean the ele-
ment. In very dusty environments, check the filter daily.
can be purchased from your local HONDA dealer.
Replace the element as needed. Replacement elements
Weekly: Check the level of
the TSL in the displace-
ment pump packing nut. Fill the nut, if necessary. Keep
TSL in the nut to help lubricate the pump packings.
See
page
8.
Weekly:
Use
a grease gun to grease the zerks (32) on
this unit. The grease purges pivot areas of paint buildup.
See Fig.
22.
Spark plug:
Use
only a (NGK)
BPGES or BPRGES
plug. Gap the plug to
0.025 to 0.030
in.
(0.7 to
0.8 mm).
Always use a spark plug wrench.
. .
A
One zerk on dual gun selector
A
One zerk
on
each
gun
holder
A
One zerk on caster lever
A
One zerk on caster latch
A
One zerk on wheel
WOlC
308-082
23
Advertisement
Table of Contents
