Pioneer PDR-555RW Operating Instructions Manual page 50

Term Function
CD-R disc: | Compact Disc - Recordabie.
CD-RW disc: Compact Disc-Rewritabie.
SCMS
System for restricting personal recording (norne-use recording) for copyright
} protection.
| Skip: Refer to "Skipping undesired tracks".
i fed eee eecees setae see _ es _
Skip ID: identification which sets or cancels skipping of undesired track before disc
finalization.
Skip ON/OFF: Switching on/off of the function to skip undesired tracks to which skip IDs have
been set,
TOC Table Of Contents of a disc which allows it to be played on ordinary CD players.
PMA:
Program Memory Area. The area used for temporary storage of TOC data until
finalization of a CD-R or CD-RW.
Track number updating
Function which, either automatically or manuaily, update the track number of the
track being recorded by one.
Digital synchro recording
(automatic digital
recording):
Function which starts/stops recording automatically by detecting the play/stop
modes of a digital component.
Dise identification:
Operation of checking whether the loaded disc is a CD, CD-R or CD-RW.
Disc damage: Phenomenon with which recording and playback of disc become impossible due p. 108
to physical shock or power failure during recording i
Demonstration:
Special display mode for use in point-of-sale demonstration.
i 9. 100, 109
Fader: Function for recording or playing sound by smoothly varying the volume 9. 64, 90
Finalization: Operation for making a recorded CD-R disc playable on ordinary CD players 9. 74
Write-once:
A CD-R disc can be recorded only once and the recording cannot be erased.
p. 42
Recording always starts from the end of previous recording.
Label side:
The disc side on which letters, etc., are printed.
2.38
p _ eee
Professional dise (Pro CD-R or CD-RW disc for other purpose than the consumer use (refer to p. 14, 42
DISC): } "consumer disc"). The applications of this disc are not limited
Consumer disc | CD-R or CD-RW disc designed for recording music for personal entertainment po. 14, 42
i use.
i Remaining recording time: Time of the disc's non-recorded section where recording is possible. 5. 36
Total recording time:
Time of the disc's section which has already been recorded onto.
2. 36
RESUME: Operation initiated in case of trouble in recording, consisting of recovery of the i p. 62, 76, 108
disc to enable next recording. |
Recording permitted/ Statuses set with the SCMS, in which digital recording is enabled/disabied p. 58
inhibited:
respectively.
1 04
<PRE1269>
En