How The Scanner Button Works - Microtek XT3500 User Manual

4. To define another custom function button if desired, follow steps 2 through
3 of this sectioin.
5. When done, click the OK button to exit the Scanner Button Settings
Interface.
NOTE:
1. When you have finished the settings for the function buttons in the interface,
you have to exit interface before you perform the predefined scanning task
by pressing the function button on the scanner.
2. If ScanWizard DI is launched and the Main interface (AP control panel) is
activated on the screen, the scanned image files will appear in the Thumbnail
View window for your viewing after you perform the scanning task by
pressing the function button on the scanner.

How the Scanner Button Works

When you finish customizing the buttons, follow the steps below to perform the
scanning task by pressing the button on the scanner. The scan will be performed
in accordance with the designated button function using the parameters
configured in the Scanner Button Settings interface.
1. Place a single-sheet document to be scanned on the scanner's glass surface.
2. Exit the Scanner Button Settings interface.
3. Press the F1, F2 or F3 button on your scanner to activate the function
associated with the F1, F2 or F3 button easily.
When done, the scanned images will be automatically saved into an assigned
folder in the "Scanner Button" panel.
4. If necessary, specify new settings for each button. Follow the procedures
(steps 1 through 5) for the "Customizing the Scanner Buttons" section to
specify your new requirements for the buttons that you wish to redefine.
XT3500 User's Manual 43