Microtek XT3500 User Manual page 19

8. If necessary, go to the Image Process panel by clicking the Image Process
tab in the Settings window. Use the image correction tools presented there
to enhance the image quality according to your specific requirements.
9. Click the OK button to close the Scan Setup interface and return to the Main
interface of ScanWizard DI.
10. In the Main interface, click the File Format menu button to select a file
format for the scanned images.
11. In the Main interface, click the File Name menu button to specify a file
naming method for the scanned images.
12. In the Main interface, select and click the Normal Scan button to start
scanning.
When done, the scanned images will be automatically saved into the folder
defined in the File Location menu box. At the same time, the scanned
images will be displayed in thumbnail sizes in the Thumbnail View window
and labeled with the file name and file format specified earlier.
13. Click the Open Folder button to locate the scanned images if you want to
view.
XT3500 User's Manual 19