Positioning Documents
Into the ADF (Automatic Document Feeder)
This section shows you how to position a single-sheet document, as well as a
stack of documents, into the ADF (Automatic Document Feeder).
1. Raise the Scanner Lid, and remove the ADF's protective film from the cover
of the scan area. Close the lid.
Protective Film
2. Pull out the top Tray Extender for better paper support if the length of the
originals exceeds 10 inches.
Document Feed Tray
Tray Extender
Document Output Tray
ArtixScan DI 2015c User's Manual
15