Scanning Scenarios; Using Scanwizard Di; Scanning Documents - Microtek XT3500 User Manual

Scanning Scenarios

This chapter demonstrates the scanning operations using ScanWizard DI (PC) and
ScanPotter (Mac) software. For detailed information about the various commands
and features of the software, please refer to the on-line help manuals within the
software after installation.

Using ScanWizard DI

ScanWizard DI is a scanning software designed by Microtek for document
scanning in color, black and white, and grayscale. Its user-friendly interface
enables you to easily start the scanning process. Refer to the ScanWizard DI
software manual for more details.
The following sections will show you step by step how to use ScanWizard DI.

Scanning Documents

1. Place a single-sheet document to be scanned on the scanner's glass surface.
2. Launch ScanWizard DI as a stand-alone program by clicking on the
3. Click the Scan Setup button in the interface to activate the Scan Setup
4. In the Scan Setup interface, follow the steps below to specify your basic
ScanWizard DI icon on the desktop.
interface.
settings.
a) Select Flatbed in the Scan Source as
your image input device.
b) Select the appropriate image type in the Color Mode as your image
output type.
– Select RGB Color (24 bits) to scan
the image in color.
– Select Grayscale (8 bits) to scan
the image in grayscale.
– Select Black & White (1 bit) to
scan the image in black-and-white.
Select Auto Color Detection to scan the image in color or non-color
–
based on the automatic judgement and detection of the system.
– Select Complex to scan the image in color, grayscale or non-color
based on the customization.
XT3500 User's Manual 17