Positioning Documents
Into the ADF (Automatic Document Feeder)
This section shows you how to load a stack of documents into the ADF
(Automatic Document Feeder).
1. Fan the stack of papers to be
2. Align the top edges of the papers
3. Load the stack of papers into the
20
ArtixScan DI 5240/5250/5260 User's Manual
scanned before loading them into
the Document Feed Tray.
neatly.
Document Feed Tray, with the side
to be scanned facing down and the
top edge of the paper facing toward
the feeder.
Push the stack of papers into the
tray until the paper's edge touches
the bottom edge of the feeder.
WARNING: The document feeder
is not designed for scanning
photos; doing so may damage
your originals. Microtek accepts no
responsibility for damage that may
arise from misuse of equipment.
Document Feed Tray