Step 2: Installing The Software - Microtek XT3500 User Manual

Step 2: Installing the Software

Important: You must install the software before connecting your scanner. And,
always close any open programs before installing software.
Download software from website to install
1. Visit the Microtek website at https://www.microtek.com.
2. Use the search function to find the product "XT3500" and navigate to the
"Downloads" page associated with this product.
3. Download the necessary drivers and software marked as "Yes" on the
download list, based on your operating system.
4. Once the file download is finished, proceed with the software installation.
• For Windows: Double-click the downloaded file (*.exe) to begin the
installation process.
• For Mac: Double-click the downloaded file (*.dmg) to reveal its contents.
If it's a ScanPotter PKG file, double-click it to begin the installation. If
it's a ScanPotter.app file, just copy it to the "Applications" folder, and
the installation will be done.
5. After installing all the required drivers and software, restart your computer.
NOTE: The file download process may take some time. The duration may vary
based on your internet speed, bandwidth, file size, and other factors. Please
be patient during the download. If you encounter any issues or need further
assistance, please contact Microtek Customer Service Department.
Install software from DVD (for Windows users)
1. Place the Microtek Software DVD into a drive.
2. Follow the on-screen instructions to install the driver and software.
NOTE: If the Microtek Software Installer screen does not come up
automatically, double-click the following in succession: "My Computer"; the
DVD-ROM icon; then cdsetup.exe to start the installer program.
3. Click EXIT on the Microtek Software Installer screen when all the software
has been installed.
4. Restart your computer.
XT3500 User's Manual 13